Aggregate finishes

Washed Aggregate Perth: Washed vs Exposed vs Honed

Washed aggregate is Perth's popular exposed-aggregate driveway finish. Here's how washed, exposed and honed concrete differ, plus cost, colours and care.

Natural characterConsidered finishesEveryday spaces
Residential / Commercial / Industrial Discover your floor

Start with your space

Choosing Washed Aggregate for Your Perth Project

Washed aggregate is Perth’s familiar decorative driveway finish — the top layer of cement paste is washed off while the slab is still green, leaving the stone sitting proud of the surface. Its whole look comes from that stone, and natural quarry aggregate varies from batch to batch, so the finish is best chosen from a physical sample seen in daylight rather than a brochure or a screen. It’s a strong all-rounder outdoors, though whether it suits your project depends on where it’s going and how the space is used — and if an existing washed or exposed surface has grown too rough underfoot, honing it smooth is often an alternative to replacement. Tell us about your slab, the area and the stone and colour you’re drawn to, and we can talk through what will work.

FREE CONSULTATION

Get a Free Estimate

Fill in your details and we'll be in touch to discuss your project.

Drawings, plans or photos help us quote accurately. Up to 40 MB in total.

Need polished concrete services urgently? Call (08) 7828 0211

Quick answer

  • Washed aggregate is a method for producing an exposed-aggregate finish — and a common Australian synonym for it. The top layer of cement paste is washed off while the slab is partly set, revealing the stone beneath.
  • Honed concrete is different. Honing grinds the surface smooth and then seals it — a separate process, not another word for the same thing.
  • It's a popular, grippy outdoor finish in Perth, used widely for driveways, paths, patios and pool surrounds.
  • Cost varies a lot with stone choice, area, preparation and sealing. We don't publish a per-square-metre price; the sensible move is to compare like-for-like quotes.
  • Rough existing aggregate can often be honed smoother rather than replaced — if the slab is sound. That depends on an assessment.

What is washed aggregate concrete?

Washed aggregate is a decorative concrete finish. Instead of a smooth, uniform top surface, you see the decorative stone — the aggregate — sitting at the surface of the slab. It's made by removing the thin top layer of cement paste while the concrete is still partly set, so the stone just beneath is revealed rather than buried.

You'll also hear it called "washed concrete" or "exposed concrete." The washing simply refers to how that top paste is taken off: with water, usually helped along by a chemical that slows the surface from setting so it can be rinsed away cleanly.

washed aggregate perth: washed vs exposed vs honed

Washed vs exposed vs honed aggregate — the difference explained

This is where most of the confusion lives, so it's worth being precise. These three terms describe related but distinct ideas: one is a category, one is a method, and one is a separate finishing process.

In short: "exposed" describes the result, "washed" describes the method, and "honed" is a separate process that smooths the surface afterwards. You can read more on our washed aggregate page.

Because the words sound different, many Perth quotes present "washed aggregate" and "exposed aggregate" as two menu items. For most practical purposes they're the same finish — stone revealed at the surface of a slab. A washed, or sand-washed, finish tends to look a little finer and lighter in texture, exposing smaller top stone, where a classic exposed-aggregate look can be chunkier. If two quotes use the two different terms, it's worth asking each installer exactly what surface they're describing so you're comparing like with like. The same applies to exposed aggregate driveways specifically.

Honing is not a type of washed aggregate — it's a finishing step. A grinder takes the tops of the stones (or a plain slab) down flat and smooth, and the surface is then sealed. Honing can be applied over an existing exposed or washed aggregate slab that's structurally sound but too rough underfoot. That makes it a useful remedy rather than a starting finish, which we come back to below.

  • Exposed aggregate: Broad category — stone showing at the surface; Varies (chunky to fine); The umbrella term / the result
  • Washed aggregate: Method: retarder + wash off the top paste to reveal stone; Often finer / lighter; A way to make exposed aggregate; common AU synonym
  • Honed aggregate: Process: grind the surface smooth, then seal; Smooth; A finishing step applied over exposed/washed stone

How washed aggregate is made

The professional approach uses a surface retarder — a product sprayed onto the fresh slab that delays only the top layer of cement paste from setting. The concrete below sets normally; the thin skin on top stays soft enough to wash away later, taking the paste off and leaving the stone proud of the surface.

The timing matters. Manufacturers' data sheets generally put the washing window at roughly 6 to 24 hours after the retarder goes on, confirmed against a mock-up or test panel rather than guessed. Perth's heat can bring that window forward; cooler, damper conditions push it back. Wash too soon and you can dislodge stone; leave it too long and the paste sets hard and needs scrubbing off. The surface is usually rinsed with a hose and a clean broom, or a pressure washer, starting in one corner to check the look before doing the whole slab evenly.

There are two broad ways to get stone at the surface. Seeding (surface dressing) broadcasts decorative stone into fresh concrete, so the decorative layer is only about one stone deep and can shed over time. Washing to expose removes the top few millimetres of mortar to reveal aggregate that's already mixed through the concrete, which holds the stone more firmly — generally the sturdier option for something like a driveway.

One practical note on process: grinding and cutting concrete releases crystalline silica dust, which is a genuine health hazard. Any reputable operator works to a site control plan and project-specific work methods to manage it. Be wary of anyone describing grinding as "dust-free" — managed, yes; dust-free, no.

Is washed aggregate right for your Perth project?

It's a strong all-rounder outdoors, but the right call depends on where it's going and how the space is used. Here's how it tends to play out across the most common Perth projects.

Washed and exposed aggregate are among the most popular driveway finishes across Perth and WA, valued for their texture and grip. If your project includes the crossover — the section between your property and the road — check your own local council's crossover requirements before you finalise anything, as rules vary between councils and can cover materials and finishes. Ask your installer who's responsible for meeting them.

Two things matter most around a pool: grip when wet, and heat underfoot. On grip, it's worth knowing that in Australia slip resistance is assessed under AS/NZS 4586 (with guidance in handbook HB 198), which sets recommendations for areas like pool surrounds and ramps to water. We don't make blanket "slip-resistant" claims — a meaningful slip rating belongs to a specific product tested to that standard, expressed as a wet pendulum (BPN) value. It's also worth knowing that contamination around a pool can reduce wet grip even when the surface doesn't look dirty, so grip when new isn't a guarantee of grip forever.

On heat, lighter-coloured stone reflects more of the Perth sun and tends to stay cooler underfoot than dark stone, which matters on a surface people walk on barefoot. If you're weighing finishes specifically for a pool area, our concrete pool surrounds page covers the options.

For patios and alfresco areas, the same trade-off between texture and comfort applies — a finish that's pleasantly grippy on a path can feel coarse under bare feet on a frequently used entertaining area. If comfort underfoot is the priority, a honed finish may suit better. Sealing choices also affect how the surface looks and how easy it is to keep clean.

Choosing stone and colour in Perth

Washed aggregate's look comes almost entirely from the stone, and natural quarry aggregate varies from batch to batch. For that reason, choose from a physical sample rather than a brochure or a screen — and ideally look at it in daylight, since stone reads differently under the Perth sun than under shop lighting. Colour can be matched, loosely, to your home's façade for a cohesive result.

As an example of what's available locally, the Boral "Expose" WA range is a widely used option, with stone groupings that lean on Western Australian names — beach and natural tones, darker "black" tones, warmer golden tones, and lighter, fresh tones. We mention it to show the breadth of local choice, not as an endorsement or a product we supply. Whatever range you look at, the principle is the same: pick from the actual stone.

What does washed aggregate cost in Perth?

We don't publish a per-square-metre price, because an honest number depends on your specific job — and quotes that lead with a single rate often hide the differences that actually matter. What's more useful is understanding what drives the cost and how to compare quotes properly.

The main cost drivers are:

When you compare quotes, make sure each one spells out the same scope. A like-for-like quote should be clear about:

For context, independent 2026 Australian cost guides put decorative finishes like exposed and washed aggregate well above plain concrete — but those are third-party market references, not our pricing. Treat them as a rough sense of the market, and get a proper quote for your job. If you'd like to think it through first, our polished concrete cost guide walks through how to plan a decorative-concrete budget without relying on a headline rate.

  • Area and layout — size, shape, and how many edges and awkward sections there are.
  • Stone selection — decorative aggregates vary in price, and this is often the biggest single variable.
  • Surface preparation and the condition of any existing slab — removal, levelling and make-good all add up.
  • Access — tight or difficult sites take longer.
  • Sealing and finish choices — the sealer type and whether you want matte or a glossier look.
  • Surface preparation and any demolition or removal.
  • The exposure method (seeded vs washed-to-expose) and the stone being used.
  • Control joints and how cracking will be managed.
  • Sealing — product type and how many coats.
  • Who handles the crossover and any council requirements.
  • How edges, drainage and any make-good are handled.

Living with washed aggregate — sealing, maintenance and cracking

Washed aggregate is about as durable as regular concrete, but like any outdoor surface it needs some care, and it helps to know what's normal.

Sealing. Most trade sources recommend sealing exposed and washed aggregate to protect it and keep it looking fresh; a minority of marketing pages claim it isn't necessary. The practical position is that sealing is generally worthwhile, and that reseal intervals vary by sealer type — surface sealers need redoing more often than penetrating ones. Perth's strong UV tends to shorten those intervals compared with milder climates. Sealing also changes the look, shifting a matte surface towards a glossier one, so ask to see a sealed sample. Our concrete sealing page covers this in more detail. These are general ranges, not a performance guarantee — confirm the specifics with your installer and the sealer manufacturer's current data sheet.

Cracking and control joints. Concrete shrinks as it cures, and control joints are deliberate weak lines cut into the slab to steer any cracking to a chosen place. A crack that follows a joint is doing its job; random cracking across the field is usually a sign the jointing wasn't right for the slab. If you're dealing with existing cracks, repair is possible — bearing in mind that patches on an aggregate surface can be visible, because the surrounding slab has aged and texture is hard to match exactly.

Loose stones and staining. The risk of stones working loose is higher with the seeded method than with washing to expose, which holds the aggregate more firmly. Washed aggregate is also a little more stain-prone than plain concrete, since the texture can trap grime and spills like motor oil — sealing helps here too. If a surface has deteriorated badly, resurfacing may be worth considering.

Is your existing aggregate too rough? Honing as a remedy

A recurring problem we hear from Perth homeowners: an exposed or washed aggregate driveway or surround that's simply too rough underfoot — hard on bare feet, not kid-friendly, or starting to shed the odd stone. The instinct is to assume it all has to come up and be replaced. Often it doesn't.

If the slab is structurally sound, honing — grinding the surface smoother and then sealing it — can be an alternative to replacement. It takes the sharp tops off the stone and leaves a more comfortable, easier-to-clean surface while keeping much of the original character. Whether it's suitable comes down to the condition of your particular slab, which is why it starts with an assessment rather than a promise. You can read more on our concrete honing page.

Washed aggregate vs liquid limestone vs honed concrete

These three are the decorative driveway finishes Perth buyers most often weigh against each other. None is universally "best" — it depends on your taste, your site and how the space is used.

The honest answer is that the right choice depends on the look you're after, how the area is used, and what your slab and site allow — which is exactly what a site assessment and a few physical samples are for.

  • Washed / exposed aggregate — natural stone look with plenty of texture and good grip; the texture that helps on a driveway can feel coarse underfoot on a patio, and darker stone absorbs heat.
  • Liquid limestone — a smoother, paler, more uniform look that stays relatively cool underfoot, popular around pools; a different aesthetic and a different maintenance profile. See our limestone driveways page.
  • Honed concrete — the smoothest and most refined of the three, ground flat and sealed; more comfortable underfoot, and the finish you'd choose if you want a calmer, more contemporary surface.

This guide supports project planning. Confirm the selected products, substrate requirements and installation instructions with the supplier.

A little more clarity

Frequently Asked Questions

Good decisions start with a clear understanding of your floor.

Is washed aggregate the same as exposed aggregate?

Essentially yes. "Exposed aggregate" is the broad term for the finish where stone shows at the surface; "washed aggregate" describes a common method of achieving it and is used as a synonym in Australia. Washed finishes often look a little finer and lighter in texture.

What's the difference between washed/exposed aggregate and honed concrete?

Washed and exposed aggregate leave the stone textured and proud at the surface. Honing is a separate process that grinds the surface smooth and then seals it, producing a far more comfortable, refined finish.

Is washed aggregate slippery when wet?

Its texture is a big reason people choose it for driveways and wet areas. That said, we don't make generic slip claims — in Australia, slip resistance is assessed under AS/NZS 4586, and a meaningful rating belongs to a specific tested product. Contamination can also reduce wet grip over time.

Does washed aggregate get too hot around the pool?

It can, depending on the stone. Lighter-coloured aggregate reflects more heat and tends to stay cooler underfoot in the Perth sun; darker stone absorbs more. Choose with barefoot comfort in mind for pool areas.

How long does a washed aggregate driveway last in Perth?

It's about as durable as regular concrete and can last for decades with proper maintenance. Some marketing sources quote figures like 30 years or more, but those are third-party claims rather than a guarantee we make — real-world lifespan depends on the build, the sealing and the upkeep.

How often do I need to reseal it?

It depends on the sealer. Surface sealers need redoing more often than penetrating ones, and Perth's UV tends to shorten intervals. Ask your installer what sealer they're using and what reseal schedule it calls for.

Why is my exposed aggregate driveway cracking?

Cracking that follows a control joint is by design — the joints are there to steer it. Random cracking across the slab usually points to the original jointing not suiting the slab. An assessment can tell you which you're dealing with.

Will the stones come loose over time?

It's more of a risk with the seeded (surface-dressed) method, where the decorative layer is only one stone deep. Washing to expose aggregate that's mixed through the concrete holds the stone more firmly.

My aggregate is too rough for bare feet — can it be fixed?

Often, yes. If the slab is sound, honing it smoother and resealing can be an alternative to replacement. Whether it suits your slab needs an assessment first.

How much does washed aggregate cost in Perth?

We don't publish a per-square-metre price, because it depends on stone choice, area, preparation, access and sealing. The best approach is to compare like-for-like quotes that spell out scope. Third-party cost guides put it well above plain concrete, but treat those as market references, not our pricing.

Explore the related service.

Bring a clearer brief to your flooring project.

Discuss your project ↗

Your next step

Premium Concrete Honing From Perth’s Trusted Concrete Contractors

Tell us where you’re starting, the finish you love and when you’d like to begin. Let’s work out the details together.

Homes & renovationsCommercial spacesExisting floors