By Perth Honed Concrete · Planning guidance
The short answer
- Honed concrete grinds an exposed-aggregate surface smoother and more comfortable underfoot than its raw form.
- Smoother means grip has to be built in deliberately — surface texture plus a satin (not gloss) sealer — so the surround stays safe when wet.
- Heat underfoot is driven mainly by colour and shade, not by the finish itself. Lighter colours run cooler, but very light surfaces can glare near water.
- Salt and chlorine wear pool surrounds over time, so the sealer system and periodic resealing matter.
- The right answer always starts with an assessment of the slab you actually have, plus a sample you can see in your own light.
What "honed concrete" means around a pool
Honing is a grinding process. On an exposed-aggregate slab it grinds down the top surface — including the tops of the stones — to produce a flatter, smoother, more even finish than raw exposed aggregate. Think of it as a quieter expression of concrete: less texture than exposed aggregate, less sheen than a mechanically polished floor. You can read more about the process on our concrete honing page.
It helps to keep three Perth favourites separate, because the market uses the words loosely:
One practical point worth knowing early: honing can often be carried out on an existing, structurally sound slab, which can mean smoothing what you have rather than demolishing and starting again. Whether that is realistic depends entirely on the slab, and we come back to it below.
- Exposed aggregate — the stone is deliberately revealed and left textured. It is the most common pool surround finish in Perth.
- Honed concrete — that same kind of surface ground back smoother and more comfortable to walk on.
- Liquid limestone — a separate, distinctly Western Australian product: crushed limestone mixed with cement and poured in situ. It is not the same thing as honed concrete, and we treat it here only as a comparison, not as something we present as our own finish.

Is honed concrete slippery around a pool?
This is the single most common worry we hear, and it deserves a straight answer: a smoother finish can be slippery when wet, and plenty of pool owners who have chosen smooth finishes report exactly that — especially with children running around the water's edge. The word "honed" does not make a surface safe underfoot. Grip is not a property you get for free with the finish; it is something that has to be deliberately engineered into the surround.
So the right question to ask any installer is not "is honed concrete non-slip?" but "how will you build wet grip into this surface, and how will you keep it there?"
A note on numbers: Australia does have a standard slip-resistance test (the AS 4586 pendulum test, which produces a P1–P5 rating). But a meaningful rating only comes from testing the specific finish-and-sealer system you are actually buying. We do not quote a slip rating for honed concrete as a blanket claim, and you should be cautious of anyone who does without a current test to back it. If slip performance is critical for your household, ask whether the installer can arrange a pendulum test of the exact system they are proposing.
Wet grip around a pool comes from surface texture and the right sealer, not from gloss. The main levers an installer can pull are:
The honest framing is this: a honed surface can be brought back toward the grip of an ordinary brushed finish, but only if texture and sealer are chosen with that in mind from the start. Confirm it in the quote, and ideally feel a wet sample before you commit.
- Surface texture — a broom finish, light sandblasting, or acid etching adds microscopic roughness that gives bare feet something to hold onto when the surface is wet.
- Grit in or under the sealer — a fine anti-slip additive can be broadcast into the sealer coat to lift grip on an otherwise smooth finish.
- Satin over gloss — a high-gloss sealer tends to feel slicker when wet, so a satin or matte sealer is generally the safer choice for a pool surround. Sealer choice is a decision in its own right, and we come back to it under salt and sealing below.
Will it be too hot underfoot in a Perth summer?
The second big worry, and here the common assumption is wrong. Barefoot heat is driven mainly by colour and shade, not by whether a finish is honed, exposed or polished. Any solid masonry surround can get uncomfortably hot in full Perth sun, and a dark surface will always run hotter than a light one in the same spot.
Lighter colours reflect more sunlight and absorb less heat, so a lighter honed surround will generally be cooler to walk on than a dark one. That is the single most effective lever you have. There is a trade-off, though: a very light, pale surface near water can produce a lot of glare on a bright day, so the comfortable middle ground is often a lighter — but not blinding — tone.
Two other practical levers help regardless of finish: shade (a canopy, pergola or umbrellas over the main walking zones) and simply wetting the surface before bare feet cross it. What we will not do is promise a surface temperature. With Perth summer maximums regularly pushing past 40°C, honest expectation-setting beats a "cool underfoot" slogan every time.
Salt, chlorine and keeping it sealed
A pool surround lives in a harsh little microclimate: splash, evaporation, sunscreen, leaf litter and pool chemistry all land on it. Two wear factors matter most.
The sealer system is your main line of defence, and it is a genuine decision. Film-forming sealers such as acrylics sit on top of the surface; they can look good but may get slippery when glossy and can flake or lift around cracks and control joints. Penetrating sealers and hardeners soak in instead, tend to be more salt-resistant and lower-maintenance on smooth concrete, and leave a more natural matte look. Which suits your surround depends on the finish, the colour and how you use the space — talk it through, and see our concrete sealing page for the trade-offs.
Resealing is periodic, not "set and forget", but the interval depends on the product and system you choose and how exposed the surround is. Rather than quote a fixed number of years, ask your installer for the resealing cycle that applies to the exact sealer they recommend, and get it in writing.
One safety and compliance point on the process itself: grinding concrete releases crystalline silica. Honing is never a "dust-free" job. A professional operator should be working to a project-specific control plan — dust extraction, water suppression and the right protective equipment — rather than treating it as an incidental mess. It is a fair thing to ask about when you compare quotes.
- Salt. As splashed water evaporates, it leaves salt crystals behind, and those crystals can abrade film-forming sealers over time. Remember that a saltwater pool is still a chlorine pool — the chlorine is simply generated from the salt — so both factors apply. In coastal Perth suburbs such as Cottesloe, Scarborough or Fremantle, airborne salt adds to the load.
- Chlorine and sun. Over the years, pool chemistry plus UV contributes to staining, discolouration and general wear on any surround.
Will it crack — and what about joints and coping?
All poured and cementitious surrounds can crack; concrete moves with temperature and ground conditions, and no honest installer can guarantee a surround will never crack. What a good one can do is manage the risk. Control and expansion joints are placed to give the slab planned places to move, which reduces random cracking. It is worth knowing that sealer problems and cracks often show up first at joints and edges, which is exactly why joint detailing and sealer choice are linked.
Coping — the capping at the pool's edge — and joint spacing are design details that should follow your installer's specification and the relevant concreting standards for your site. We are not going to invent joint spacings or coping dimensions here, because they depend on your slab, your pool and your site. Treat any guide that quotes exact numbers as generic. The right figures belong in a plan drawn for your project.
Honed vs exposed aggregate vs liquid limestone in Perth
These are the three finishes Perth buyers most often weigh against each other for a pool surround. There is no universal winner — the right choice depends on how your family uses the space, your pool's aspect and your taste. The table below is a fair summary, not a sales pitch.
Quick verdict. If natural grip matters most and you don't mind a rougher feel, exposed aggregate is the Perth default. If you want a smoother, calmer surface and are willing to specify grip properly, honed concrete is the considered middle path. Liquid limestone is a genuinely WA-popular poured alternative, but treat the "cool and non-slip" marketing as something to verify rather than assume. You can read more about the textured option on our exposed aggregate concrete page.
Across all three, remember the heat point: colour and shade will affect barefoot comfort more than the finish name on the quote.
- Feel underfoot: Textured; can feel rough or sharp; Smoother and more comfortable; Smooth, poured finish
- Wet grip: Natural grip from texture; Must be built in (texture + satin sealer); Marketed as non-slip; verify for your finish
- Heat underfoot: Driven by colour/shade; Driven by colour/shade; Driven by colour/shade
- Can be done on an existing sound slab: Generally a new pour; Often yes (grind the existing slab); Poured in situ
- WA popularity: Most common pool-surround choice; Growing as a refined alternative; Distinctly popular WA product
- Honest caveat: Comfort trade-off for grip; Needs deliberate grip treatment; Can still crack; "cool/non-slip" claims worth verifying
Can I hone or resurface my existing pool slab?
Often, yes — and it is a question worth asking before you assume you need to demolish. If your existing surround is a structurally sound exposed-aggregate or plain slab, honing or resurfacing can smooth and refresh it without a full tear-out. Many owners with a rough, sharp exposed-aggregate surround specifically want it ground back to something kinder on bare feet.
The honest caveat is that the outcome depends on the slab you have: its condition, the aggregate within it, how it was originally finished, and any cracking or movement. A slab with structural problems is not a candidate for a cosmetic grind. The only reliable way to know is an on-site assessment, followed by a representative sample so you can see the likely result on your own concrete. Our concrete resurfacing page covers the options for working with what you already have.
What it costs in Perth — and how to compare quotes
We do not publish dollar figures for pool surrounds, because a credible price depends on your slab, your site and the exact system you choose — and a number pulled from the air helps no one. What we can do is help you compare quotes properly, which is where most people actually lose money or get a surprise.
When you line up quotes, make sure each one is pricing the same job. Ask every installer to spell out:
If you come across national cost ranges online, treat them as rough context only — they are not Perth pricing, and they are not ours. For a figure that means something, you want a scoped quote against the brief above. When you are ready, our concrete pool surround service starts from exactly that kind of assessment.
- Slab preparation and repairs — grinding back, crack repair, levelling. This is often where quotes quietly differ.
- The finish and colour — exposure, honing, and the specific colour or tint, which affects both look and heat.
- The sealer system — which product, film-forming or penetrating, how many coats, and the resealing cycle it will need.
- Grip treatment — exactly how wet slip resistance is being built in.
- Joints and coping — how control and expansion joints are detailed, and how the finish meets the pool edge.
- Access and site conditions — tight access, excavation or awkward levels can change the job.
Choosing the right finish for your Perth pool
Pulling it together, the finish that suits your pool depends on a handful of honest questions:
Whatever you lean toward, start from an assessment of your slab, ask to see a sample in your own light, and if grip matters, feel that sample wet. Those three steps will tell you more than any brochure.
- Who uses it? Young kids running around the edge push you toward maximum wet grip — texture plus a satin sealer, whatever base finish you pick.
- Which way does it face? A hot, west-facing surround in full sun makes colour and shade your priority.
- How close to the coast are you? Salt exposure raises the importance of a salt-resistant penetrating sealer and a realistic maintenance plan.
- What look do you want? Smooth and calm points to honed; natural and textured points to exposed aggregate.
This guide supports project planning. Confirm the selected products, substrate requirements and installation instructions with the supplier.